Semi-automatic box gluing machine
It is very important to check the wear and tear of electrical parts. The detailed rules are introduced in the text.
The operator checks the oil level of each tank before going to work every day, cleans the sliding guide rail surface, adds lubricating oil, and inspects the empty running before production to observe whether the working condition of the lubrication system is normal.
All fuel tanks and refueling holes on the semi-automatic tank gluing machine should be kept intact. The missing covers should be filled in time to avoid iron scraps and dust from entering the friction surface and the oil tank.
Enterprises, workshops, sections, shift groups and a single piece of equipment are required to set monthly, quarterly and annual high oil consumption indicators. If the indicators are exceeded, the reasons should be identified so as to revise the quota and study ways to overcome them. The oil tank, working box, gear box, hydraulic box, oil pump box, etc., the amount of oil storage, the operator should be responsible for observing, lower than the oil line should be responsible for timely reflection to the lubricator, the lubricator is responsible for adding supplements and implementing regular oil change plan.
The electrical parts on the semi-automatic sticking machine, such as various transmission motors, should be cleaned and changed by electricians.
The operator shall be responsible for refueling and maintenance of lubricating points and all sliding guide surfaces that are refueled once or several times a day per shift.
Oil tank, oil pool, oil supplement and regular cleaning and oil change work, are responsible by the lubricator, the operator to cooperate.
Warm tips: According to the provisions of the lubrication chart or card, regularly and regularly for refueling, adding oil and cleaning oil change.
Post time: May-03-2023