Welcome to our websites!

NCRW cutting off machine (helix blade)

Short Description:

Product Attributes
Max. design speed: Helical knives 150 m/min; 180 m/minute.
Effective width: 1400 mm – 2500 mm.
Features:
store 200 orders, replace cutter specifications quickly and accurately, non-stop for a single, and enables networked computers to facilitate production management.
knife shaft drive gears are precision forged steel high-frequency hardening, backlash-free transmission, the use of advanced keyless connection, high transmission accuracy and long life.
Using serrated knife, reducing cardboard resistance, low noise.
are used around the feed roller platen way the sun wheel, transmission smooth, uniform pressure, not easy to crush plate board or cause blockage.
The model is brake energy storage (non-dynamic braking), the energy consumption in the production process, the average power consumption is an ordinary NC cutter 1/3, save power more than 70 percent to save money goals.
Precision adjustable no gap gear to ensure precise blade engagement, running balance.
The independent pump and filter with two copper distribution in each gear position oil.


Product Detail

Product Tags

Structural features

It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management.

Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy.

Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.

Around feed rollers are used  the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.

This type of brake is energy storage type (non-energy brake), so in the process of production, the average power consumption is 1 / 3 of that of the ordinary NC cutting machine, saving more than 70% of electricity and achieving the goal of saving money.

Exact and adjustable no gap gear to ensure precise blade engagement, running balance.

Independent oil pump and filter are used to distribute two sets of copper pipes in each gear position to feed oil, lubricate and cool.

Knife roller: fine quality forged steel material, the balanced, with good stability.

NC-150  NC cutter helical knives

NC-150-NC-cutter-helical-knives

Technical parameters

Effective width 1800mm
Operation direction left or right(determined in accordance with customer plant)
Design speed 100 m / min
Mechanical configuration computer helical cutter crosscutting
Minimum cutting length 500mm
Maximum cutting length 9999mm
Cutter accuracy Uniform for ± 1mm,  non-uniform to ± 2mm
Equipment size Lmx4.2 Wmx1.2 Hmx1.4
Single machine weight maximum 3500kg

Roller diameter parameters

Cross on the knife shaft center distance:¢216mm

Before the lower conveying roller diameter  ¢156mm

After the lower conveying roller diameter:¢156mm

Roll diameter: 160mm

Output solar wheel diameter: 160mm

Note: all roller shafts after grinding, the surface of hard chromium plating (except upper, lower tool shaft).

Powered motor parameters

main drive motor power:12.5Kw   Full AC synchronous servo

Before feeding motor power:3Kw(Frequency Control)

Oil pump motor power:0.25Kw


  • Previous:
  • Next:

  • Write your message here and send it to us